PrismBeam APP Happy Lighting/Star Light Running

APP Star Light Running

RGB version lamp comes with remote control with the lamp, and the remote control can realize one-key switch to red light driving (no flow animation) mode.

The remote control is paired with the lamp before leaving the factory, if the running lights do not switch after pressing the remote control, the customer can press the brake and hold the remote control for 10s to complete the pairing of the remote control.

GB version lamp can control the animation of the running lights when they work normally through the APP (star light running) (the start animation cannot be adjusted).

Star Light Runing APP download method: App Store search Star Light Runing to find (Figure 1) arrow pointed to the software to complete the installation, Android mobile phone Scan the QR code or Google Play search Star Light Runing

Device Bluetooth connection method:Open the Light Run APP, click Add Device (Figure 2), enter the interface (Figure 3) and click the nearby device searched to complete the Bluetooth connection.

The remote user guide to turn off rgb function

APP Happy Lighting

The RGB car lamp can be controled the animation and color of the driving light when it is working normally by the APP(Happy Lighting). (the startup animation cannot be adjusted)

APP Capability: Switch from dynamic light effects and colors.( No memory function )

Download Steps

From iphone APP Store: Search Happy Lighting and download
From Android Google store or browser: Search Happy Lighting and download

Bluetooth Connection Steps

Open the Happy Lighting APP
Click 1 to wait for the phone search your device
Click the device searched to finish connecting

Switch Among Colors

Click 3, 4 and then drag 5 to change light color

Driving light of car lamp animation adjustment:

Click 6 to enter the animation adjustment interface of lamp, select the driving light animation mode
Click 8 to adjust speed of dynamic effect,adjust the brightness of the driving light

RGB / App Connectivity Issues

If you are experiencing connection or control issues with the RGB app, please check the following:

Phone Settings & Power:

Ensure your phone's Bluetooth is turned ON.

Ensure Location Services (GPS) are turned ON (required for Bluetooth scanning on Android).

Important: The vehicle's Running Lights (Parking Lights) must be turned ON to power the Bluetooth module.

Signal Interference:

Make sure there are no other strong signal sources inside or near the vehicle that could interfere with the connection.

App Installation:

Android Users: Please scan the QR code provided to download the App.

iOS Users: You can scan the QR code or search for the App name in the Apple App Store.

💡 Pro Tip: If you previously used the "Light Running" app and are having issues, please try downloading "Star Light Running". This is the enhanced/upgraded version of the App.

Synchronization Issues (One side not working):

Most RGB kits use a physical wire to sync the left and right lights. If you can only control one side via the App, please check the Sync Signal Wire connecting the two lights to ensure it is plugged in securely.