Tail Lights · SKU 666-SR
2020-2026 Toyota Corolla Sedan Smoked Red Through-Style LED Tail Lights Assembly With Sequential Turn Signal
Style: Smoked Red
Couldn't load pickup availability
- DOT/SAE compliantBuilt for U.S. roads
- Free shippingContiguous U.S.
- 30-day returnsSee return details
- 2-year limited warrantyOn every assembly
Fits:2020-2026 Toyota Corolla Sedan
Overview
For the 2020-2026 Toyota Corolla Sedan and Corolla Hybrid Sedan (E210), all trims, this Smoked Red through-style LED tail light set replaces the factory lamps with one continuous light bar across the rear.
Highlights
- Full-width through-style light bar connects the left and right lamps into a single continuous line for a modern, wider-looking rear end.
- Smoked lens with a red signature stays close to the factory look while darkening and sharpening the rear end when the lights are off.
- Startup animation and sequential turn signal give the rear end a modern lighting sequence with a smooth sweeping indicator.
- Brighter brake and reverse lighting improves rear visibility so drivers behind you can react more clearly in traffic, parking, and low-light conditions.
- High-density LED light beads create a more even, responsive light output with a cleaner custom signature.
- Plug-and-play outer lamps connect to the factory harness, and the center bar draws power through the supplied no-cut harness.
- Weather-resistant construction helps protect the lens, housing, and internal electronics from rain, dust, and road conditions.
Compatibility & What's Included
Compatibility
Fits: 2020-2026 Toyota Corolla Sedan (E210, 12th Generation), gasoline and Hybrid — LE, SE, XSE, XLE, Hybrid LE, Hybrid SE, Hybrid XLE, and Nightshade Edition.
Does not fit: Corolla Hatchback or GR Corolla, any year. Also does not fit 2019 and earlier E170 sedans.
OEM Cross Reference: Outer Left / Driver Side 81560-02C10 (North American build) or 81561-12D10 (Japanese build); Outer Right / Passenger Side 81550-02C10 (North American build) or 81551-12D10 (Japanese build). The center bar has no standard OEM equivalent — the factory sedan has no full-width bar.
Keeps your safety tech: Your factory Blind Spot Monitor sensors are located in the rear bumper, so this tail light upgrade installs with no impact to your blind-spot system.
Fitment Note: Installing the outer lamps requires removing the trunk-side trim panels. The center bar replaces the factory garnish above the license plate. Clips and plugs throughout — no cutting or splicing. Approximately 45 to 60 minutes with basic socket tools.
What is included
Driver and passenger side tail light assemblies plus the center full-width bar — three pieces.
Plug & Play
Premium Full-Upgrade LED Tail Lights
Features vary by SKU — see the Overview for your set's exact specs.
LED Light Bar
A 3D LED light bar signature across the housing.
Sequential Turn Signal
A flowing signal that sweeps in the direction you turn.
Startup Animation
A light sequence plays when you start up.
LED Light Source
High-density LED light beads on an upgraded circuit board.
What's Inside Matters
Built for durability, clarity and reliability.
PP Housing
Polypropylene that stands up to heat and moisture.
Polycarbonate Lens
Anti-fog, UV and anti-yellowing coatings keep it clear.
Driver & Control Module
Constant-current power for stable, flicker-free light.
Pressure-Equalizing Vent
Lets moisture from temperature changes escape.
Specs
- Category
- Tail Lights
- Light source
- High-density LED light beads
- Housing
- Polypropylene (PP)
- Lens material
- Polycarbonate, anti-fog / UV / anti-yellowing coated
- Driver
- Constant-current
- Ventilation
- Pressure-equalizing vent
- Compliance
- DOT/SAE compliant
- Installation
- Plug-and-play with factory connectors
- Warranty
- 2-year limited
Installation
We strongly recommend professional installation — improper installation may void the warranty.
Frequently Asked Questions
More answers in our FAQ.
Are these tail lights street legal?
All PrismBeam tail lights are DOT/SAE compliant.
Will the sequential turn signal cause hyperflash?
CANbus decoders are built in on most vehicles, keeping a factory-correct blink rate. If your vehicle hyperflashes, contact us with a short video and we will help.
How hard is installation?
They use your factory mounting points and plug-and-play connectors — no cutting or splicing. Install time depends on your vehicle; we recommend professional installation.
What's included in the box?
It depends on your vehicle — some sets are a pair, others include the inner trunk or liftgate lamps. The exact contents are listed under "What is included" in the Overview.
What if they don't fit or arrive damaged?
Contact us right away with photos. Returns within 30 days follow our Return Policy, and manufacturing defects are covered by the 2-year limited warranty.
Shipping, returns & warranty
Shipping — Orders ship from our U.S. warehouses; delivery takes 2–5 business days after shipping. Free shipping to the contiguous U.S. (no P.O. boxes, AK, HI or territories). Tracking is emailed once your order ships. Shipping Policy
Returns — 30-day returns on unused, uninstalled items in original packaging. Return Policy
Warranty — 2-year limited warranty on manufacturing defects under normal use, resolved with replacement parts or a replacement product.
Our Promise
Built for the Road Behind You
A premium upgrade without the dealership price tag.
Engineered with Expertise
Designed in-house and built on our own production line since 2008.
Quality You Can Trust
Inspected before it ships, with lab-tested LEDs. DOT/SAE compliant.
Trusted by Drivers
500,000+ sets sold since 2008, to commuters and weekend builders alike.
